Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

LASER CUT LAMINATE REEDS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • john527
    replied
    "bump"

    Leave a comment:


  • deverhart1
    replied
    Bought 2sets, put the first set in a rebuild. Ran motor couple years, then just freshened the rings. I left the first set in the engine. They showed no signs of wear. I don't think you can buy a better set of reeds anywhere. Thanks John

    Leave a comment:


  • dwhitford
    replied
    I bought these reeds more than once just to protect my future engine-building projects from disaster. While I don't yet have any good news to report, I'm rather sure I'll never report having cold, hard steel ever running thru one of my 50-60 year-old resto engines . . . ever, long after I'm dead!

    Leave a comment:


  • modsquad
    replied
    Awesome!! got our reeds in the mail, I like the way they fit the cage without slop...Thanks!

    Leave a comment:


  • ZUL8TR
    commented on 's reply
    Thank you for the comment

  • john527
    replied
    Originally posted by 25xs View Post
    John,
    Can you post some background on these reeds as well as how many engines are running them? Engine running differences with the reeds, failures or success with them, and how long they have been or are recommended to be installed...
    Thanks!
    Tom
    We have been running the hell out of them... have not had one fail yet!
    Last edited by john527; 09-03-2016, 04:43 PM.

    Leave a comment:


  • john527
    replied
    Thanks Larry! well said

    Leave a comment:


  • Larry M
    replied
    Originally posted by ZUL8TR View Post
    Please comment on any stress issues at the sharp 90 degree corner. Merc OEM config of the left and right reeds are separate and flutter of one has no affect at that corner from the flutter of the other. I realize the reed stop clamps them and it might not be an issue in the replacement life cycle, just asking your experience with it.
    If you can find a better reed than these for the price you better buy it. I make reeds out of the same material and have had as good a result as any Boysen reeds. Heck I even bought his reed, I can't start to make them as cheap. I think you are over-thinking flutter and stress, even if it did break in the sharp corner (which I don't think it would ever do) the reed stop would hold it together.
    Larry Mac

    Leave a comment:


  • ZUL8TR
    replied
    Please comment on any stress issues at the sharp 90 degree corner. Merc OEM config of the left and right reeds are separate and flutter of one has no affect at that corner from the flutter of the other. I realize the reed stop clamps them and it might not be an issue in the replacement life cycle, just asking your experience with it.

    Leave a comment:


  • 25xs
    replied
    John,
    Can you post some background on these reeds as well as how many engines are running them? Engine running differences with the reeds, failures or success with them, and how long they have been or are recommended to be installed...
    Thanks!
    Tom

    Leave a comment:


  • john527
    replied
    .022" thick

    Leave a comment:


  • ZUL8TR
    replied
    Originally posted by john527 View Post
    Laser Cut Laminate Reeds, $35.00 per set (8) 16 reeds, Free shipping! also I will have sets on hand at Dayton record runs if interested.
    John 1-616-808-7819
    Sobel Brohers Racing 55M
    [ATTACH=CONFIG]n448549[/ATTACH]
    How thick are the reeds?

    Leave a comment:


  • john527
    started a topic LASER CUT LAMINATE REEDS

    LASER CUT LAMINATE REEDS

    Laser Cut Laminate Reeds, $35.00 per set (8) 16 reeds, Free shipping!
    John 1-616-808-7819
    Sobel Brohers Racing 55M Click image for larger version

Name:	reed.jpg
Views:	311
Size:	331.7 KB
ID:	448549
    Last edited by john527; 04-11-2017, 10:39 AM.
Working...
X