Spark PLugs

[bill boyes]

YEA ment to say already called TJ tried adapters in the past and melted them. theres got to be some ...... some where out there....somebody only if i could read japanese or know somebody in japan. Ive even tried the NGK web sight in Japan...

How do you melt a steel adapter in a aluminum head?
The Adapter do need to be cutoff as they are to long. I have seen a burnt piston with the adapter not cut off.

[Top Gun 3-Z]

it was a aluminum adoptor that i melted sorry sometimes i dont put enuff detail.it was actually a stock 102 and if my spelling bothers anybody sorry

[ricmontoya]

I just found a box of Champion K3G, equivalent to an NGK 9 heat range, exposed tip, gold center electrode, $20/plug plus shipping. 206-283-4773 ricstr4@gmail.com

[Islandmon]

I just switched to the 14mm NGK B10ES plugs and wanted to confirm that the recommended gap of .028 is a good number for use in a 302.

Thx,

Sam
87-M

[seanp3]

The 302 Manual calls for a gap of .020"

[Jim McKean]

I have NGK R8102-10 Spark Plugs

Hello Top Gun and Anyone needing NGK R8102-10 Spark Plugs;

I have 4 brand new NGK R8102-10 Spark Plugs. Send me a check for $89, which includes frt, and they are yours. I have some parts for Yamato 80 and Yamato 102, also.

Jim McKean............"captainjimmckean@yahoo.com"

Jim McKean
175 Ridgepoint Drive
Livingston, Texas 77351

[blueskyracer]

Hello Top Gun and Anyone needing NGK R8102-10 Spark Plugs;

I have 4 brand new NGK R8102-10 Spark Plugs. Send me a check for $89, which includes frt, and they are yours. I have some parts for Yamato 80 and Yamato 102, also.

Jim McKean............"captainjimmckean@yahoo.com"

Jim McKean
175 Ridgepoint Drive
Livingston, Texas 77351

Do you happen to have a y-80 head that takes the small plugs??

[Jim McKean]

No M80 14mm Cyl head

Hi;

I might have milled M80 cyl head, 14mm, but no stock head.

Jim McKean......"captainjimmckean@yahoo.com"

[Top Gun 3-Z]

just a little update the champion d16 plugs I was gonna try are to hot so if anybody was gonna \try them dont i returned the ones i bought . just gonna have to run adaptors untill i can afford to change my head thanks for all the info everybody TopGun Gary

[bill boyes]

The Champion C55cx(294) and the C53cx(293) work real well in the 18 mm head with the steel 14mm adaptors.
You have 2 choices buy an 14 mm head or use adaptors.

[voodoo]

LOL!!! The NGK wharehouse is out of those and will probably not stock any more. I bought a box of 10 two years ago and have 6 un used 2 with 3 races on them and 2 with 5 min run times on them. I may be selling them after Memorial Day weekend. I have a very solid 80 that should sell that weekend and if the buyer dose not want to buy them i'll post the ad. There are steel inserts available of course. Be very aware of Champion plugs. I've been selling parts for over 20 years and those plugs have not been any good since the late 60's........

[Jim McKean]

NGK R8102-10 Spark Plugs;

I have a box of NGK R8102-10 Brand New Spark Plugs. Send me a check for $89, which includes freight, and I'll send them to you.

Jim McKean
175 Ridgepoint Drive
Livingston, TX 77351

E-Mail: captainjimmckean@yahoo.com