Race Ready, Complete with Steering Bar, Throttle Attachments, and Fuel Hose - $5,700
General Description:
Three Cylinder, Two Cycle, Carbureted
Manufacturers Rated HP: 50 HP at 5,500 RPM
Anticipated Racing @ 7,000 RPM
Displacement: 42.5 cu. in. (697cc)
Bore & Stroke: 2.68 X 2.52 in. (68 x 64 mm)
Approximate Weight: 140 lbs
Lubrication System: Fuel Mix
Induction: Loop Charged
Ignition System: Capacitor Discharge, One Coil per Cylinder
Manual Start With Recoil
Water Pump: In Tower Housing Above Lower Unit
Enclosed Tower Housing & Tuned Exhaust
Lower Unit Prop Shaft Diameter: 11/16th in.
Shear Pin Hole 1/4-in.
17:17 or 16:17 Gears Available
Approximate D-stock Transom Height, 12-in.
Crankshaft Center Pins Spot Welded
Major Replacement Component Prices:
Available from Bass Machines
Tower Housing $ 400
Powerhead Adapter $ 300
Lower Unit $1400
Gears $ 450
Lower Unit Shaft, ea. $ 150
12mm Coupling $ 50
Available through Tohatsu
Piston $ 57
Ring set per Piston $ 17
Crank Shaft, rods, Center Bearings
& Center Seals $375
Upper Cowling $385
Lower Cowling $236
All prices are subject to change without notice
Add packaging and shipping
Add Washington State sales tax for Washington residents
TO Order Contact:
Sid Bass
2622 Rocky Point Rd
Bremerton, WA 98312
Shop (360) 373-3839
General Description:
Three Cylinder, Two Cycle, Carbureted
Manufacturers Rated HP: 50 HP at 5,500 RPM
Anticipated Racing @ 7,000 RPM
Displacement: 42.5 cu. in. (697cc)
Bore & Stroke: 2.68 X 2.52 in. (68 x 64 mm)
Approximate Weight: 140 lbs
Lubrication System: Fuel Mix
Induction: Loop Charged
Ignition System: Capacitor Discharge, One Coil per Cylinder
Manual Start With Recoil
Water Pump: In Tower Housing Above Lower Unit
Enclosed Tower Housing & Tuned Exhaust
Lower Unit Prop Shaft Diameter: 11/16th in.
Shear Pin Hole 1/4-in.
17:17 or 16:17 Gears Available
Approximate D-stock Transom Height, 12-in.
Crankshaft Center Pins Spot Welded
Major Replacement Component Prices:
Available from Bass Machines
Tower Housing $ 400
Powerhead Adapter $ 300
Lower Unit $1400
Gears $ 450
Lower Unit Shaft, ea. $ 150
12mm Coupling $ 50
Available through Tohatsu
Piston $ 57
Ring set per Piston $ 17
Crank Shaft, rods, Center Bearings
& Center Seals $375
Upper Cowling $385
Lower Cowling $236
All prices are subject to change without notice
Add packaging and shipping
Add Washington State sales tax for Washington residents
TO Order Contact:
Sid Bass
2622 Rocky Point Rd
Bremerton, WA 98312
Shop (360) 373-3839