Skeg Template ?

[Flatiron]

Can someone tell me where the skeg template for a 102,302 and 321 for measuring Z1 Z2 Z3 Z4 Dimensions is located in the APBA rule book.

[bmitch1]

Template for the stock Yamato skeg is on Page 74 of the Stock Outboard Technical Manual... see here:
https://www.apba.org/sites/all/files...1-13-19%29.pdf

Photo posted for convenience...

[Flatiron]

No that's not the Template. There is one on page 80 or 81 for the Yamato 80. But I don't see one for the 300 series as mentioned in the rules. You make a copy lay it on the skeg and mark it. Then Mic it at those positions.

[ricmontoya]

Tom Johnston has them and they're cheap.

[bmitch1]

Gotcha - the next appropriate source would be a stock inspector. I'll send an email and ask...

[Flatiron]

Thank you very much, 44-P

[Flatiron]

Why wouldn't that be in the Tech manual ?

[GrandpaRacer]

Send Jeff Brewster an email and point out the omission, it should be in the manual!