Announcement

Announcement Module
Collapse
No announcement yet.

Yamato engine Temp

Page Title Module
Move Remove Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Yamato engine Temp

    What is considered the optimum Cylinder head temp for a Yamato 302 on a CSH ?

  • #2

    Re: Yamato engine Temp

    I think Guedo499 has some data on this. John?
    28-R

    Comment


    • #3

      Re: Yamato engine Temp

      keep it under 400 degrees...380-390 no problems.

      at 3/4" height rule pumping water shouldn't be an issue anyway. But ream out the hole if you're on the edge of pumping water.

      Comment


      • Flatiron
        Flatiron commented
        Editing a comment
        Thank you for the numbers Both my CSR and CSH are pumping water pretty decent, I'm rather inexperienced at reading plugs they seem a touch on the rich side. I just got a Temp gauge so I was curious about actual numbers. Thanks Again

    • #4

      Re: Yamato engine Temp

      good timing, would this be similar temps for the Y102? maiden run tomorrow

      Comment

      Working...
      X