Announcement

Announcement Module
Collapse
No announcement yet.

No 1 speedmaster

Page Title Module
Move Remove Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • No 1 speedmaster

    Just picked up a Byers craft with a 75H clone. I believe the gearcase is a no 1 speedmaster. My question is:how do you fill it. Doesn't seem to be any fill or drain plugs on it.

  • #2

    Re: No 1 speedmaster

    Just picked up a Byers craft with a 75H clone. I believe the gearcase is a no 1 speedmaster. My question is:how do you fill it. Doesn't seem to be any fill or drain plugs on it.
    About 1 to 2 inch's below the anti-cavitation plate is the fill and the vent is above the ac plate. They are labeled but pretty small print/cast letters.

    Bruce

    Comment


    • #3

      Re: No 1 speedmaster

      How about a picture of your engine & lower unit... Maybe it's an OMC 45SS gearcase..? I've seen that used on an inline 6 Mercury.



      Comment


      • #4

        Re: No 1 speedmaster

        I don't know what to make of this...here's a photo of the "speedmaster" I pulled off my 75H today. It appears that the pump housing is epoxied in place.Any recommendations.

        Comment

        Working...
        X