Announcement

Collapse
No announcement yet.

Looking for a few things

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for a few things

    Looking for a few things a mark 30 driveshaft that can be cut off for c mod,a bayer type cavitation plate,2 pro type driveshaft couplers,and also looking for a couple props 1 tooth reduction for d mod and c mod let me know what you have text me to 3022583848 or facebook message me Timothy Lee

  • #2
    Found couplers and driveshafts now looking for props like 6 3/8 -6 1/2 x 10,10.5, and also like 7x11,11.5

    Comment


    • mr2boats
      mr2boats commented
      Editing a comment
      Let me revise the props 7x11 and 7x12,13,14

  • #3
    Also looking for mark 30 merc can be a mod powerhead if reasonable enough so I can put together a c mod.

    Comment


    • #4
      -may have a cav plate
      one a ZAK, other came off a BAYER mid
      with water pump
      -do u want 4B props ?
      -where are u ?
      Brian Hendrick, #66 F
      "the harder we try, the worser it gets"



      Comment


      • mr2boats
        mr2boats commented
        Editing a comment
        what 4 blades do you have

      • bh/
        bh/ commented
        Editing a comment
        -see cav plate pix below . 2 x 4Bs;
        1) Hill Cmod ? 7x11 round blade .
        2) Pinner 7-1/2 x 12, tulip blade, DMH/FEH. Neither have been worked.

      • mr2boats
        mr2boats commented
        Editing a comment
        Brian can you call me 3022583848

    • #5
      2 or 3 blade props?

      Comment


      • mr2boats
        mr2boats commented
        Editing a comment
        3 blade props

    • #6
      Originally posted by mr2boats View Post
      Also looking for mark 30 merc can be a mod powerhead if reasonable enough so I can put together a c mod.
      I have a complete Mark 30 motor and a lot of parts to make a C Mod such as Bayer tower , Quincy pipes, Merc 16/21 units. Larry McAfee 660 775 2475

      Comment


      • #7
        -the black came came off a BAYER under a Cmod; not sure about the white one with water pump ? The ZAK has never been used. Some universal Yamato to ??? adapter plates also.
        Brian Hendrick, #66 F
        "the harder we try, the worser it gets"



        Comment


        • bh/
          bh/ commented
          Editing a comment
          $150 for the three, post paid.

        • mr2boats
          mr2boats commented
          Editing a comment
          Brian after looking at the mid sections I have the only one I can use is the Bayer and it is already drilled for early yamato pattern/

        • bh/
          bh/ commented
          Editing a comment
          I am in FL now for the winter. You will have to wait until spring . bh/
      Working...
      X