Announcement

Announcement Module
Collapse
No announcement yet.

Looking for a tower housing and some lower units

Page Title Module
Move Remove Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • lilman3m9
    started a topic Looking for a tower housing and some lower units

    Looking for a tower housing and some lower units

    Hey guys Iím looking for a couple things before I have to spend the big bucks and buy brand new. Iím looking for a tower housing that will work with a VRP or Konig but it needs to be strong being itís holding a 500/700. I have some old konig housing but they just donít seem to hold up.
    Iím also looking for a 12:14 and or a 14:15 lower unit. It needs to be a big gear unit so along the lines of a Rossi or Konny. Itís ok if it needs a rebuild or if its fresh thatís fine too.

    Let me know if you have something or might know someone that does.

  • raceright
    replied
    Did you find what you needed. If not pm me as I have several Harrison Housings with all konny adapter as well as VRY or Rossi adapters. Nothing is stronger and we use them on 500 and 700 both hydro and runnabout

    Leave a comment:


  • hshawwpba
    replied
    Check out new products from Bass Machine:

    Leave a comment:


  • mercguy
    replied
    Hey guys I’m looking for a couple things before I have to spend the big bucks and buy brand new. I’m looking for a tower housing that will work with a VRP or Konig but it needs to be strong being it’s holding a 500/700. I have some old konig housing but they just don’t seem to hold up.
    I’m also looking for a 12:14 and or a 14:15 lower unit. It needs to be a big gear unit so along the lines of a Rossi or Konny. It’s ok if it needs a rebuild or if its fresh that’s fine too.

    Let me know if you have something or might know someone that does.
    Lee Tietze for the tower assy and Mike Thirlby for the gearcase..

    Leave a comment:


  • PETEG
    replied
    I might
    send me an email, Andy

    Leave a comment:

Working...
X