Announcement

Announcement Module
Collapse
No announcement yet.

DartCraft CMH package minus powerhead

Page Title Module
Move Remove Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • DartCraft CMH package minus powerhead

    IMG_0403.JPG

    IMG_0404.JPG

    IMG_0405.JPG

    I'm spread too thin and need to cut back on my classes. Excellent condition and craftsmanship Dewie built in 2015. Complete with all Tietz hardware. No damage or wrecks. 36" bottom, 81" afterplane, 51" sponsons, vinyl wrapped. I'm 180 lbs. and weigh in right around 440 lbs. $2500

    APBA Cliff pipe kit. $500

    Tietz 8.25" tall tower, both 102 and 302 bolt patters are machined into it. $650

    Goller built 102 foot with extended skeg. All fresh gears and seals 7/2017. $650

    Plus shipping all items.

    Open to some dickering on package deals. Individually, not so much.

    Located in Oregon.

    Ken McMurphy

    503-319-5562

    Attached Files
    ddalton likes this.

  • #2

    Re: DartCraft CMH package minus powerhead

    Don't pass this one up.
    sigpic

    Dean F. Hobart

    Comment


    • #3

      Re: DartCraft CMH package minus powerhead

      bump..

      Comment


      • #4

        Re: DartCraft CMH package minus powerhead

        Pipe kit is for a 302.

        Comment


        • #5

          Re: DartCraft CMH package minus powerhead

          bump...

          Comment


          • #6

            Re: DartCraft CMH package minus powerhead

            Best offers....if they're good enough.

            Comment


            • stockc
              stockc commented
              Editing a comment
              bump.......

          • #7

            Re: DartCraft CMH package minus powerhead

            bump......

            Comment


            • #8

              Re: DartCraft CMH package minus powerhead

              Ken, I have a faint, fifty-year-old memory of a Leland McMurphy out of Oregon, CSH as I recall. Was that your dad?



              Comment


              • #9

                Re: DartCraft CMH package minus powerhead

                Yes, he is my Dad. I remember watching some races as a small boy, but he quit long before I could have started racing boats.

                Comment


                • stockc
                  stockc commented
                  Editing a comment
                  bump........

              • #10

                Re: DartCraft CMH package minus powerhead

                This boat is very, very similar to the I run in 125, just a FYI.
                Last edited by guedo499; 12-11-2017, 12:08 PM.
                http://vitalire.com/

                Comment


                • Dr. Thunder
                  Dr. Thunder commented
                  Editing a comment
                  Jon, got your message and will respond privately later ...

              • #11

                Re: DartCraft CMH package minus powerhead

                Can be delivered to 2018 Stock/Mod/J Nationals Moses Lake Wa.

                Trap adjustment over the winter, sorry Dewie, looks to have picked up about 1.5 mph and improved handling in testing.

                Comment


                • #12

                  Re: DartCraft CMH package minus powerhead

                  [ATTACH=CONFIG]n458517[/ATTACH]

                  [ATTACH=CONFIG]n458515[/ATTACH]

                  [ATTACH=CONFIG]n458516[/ATTACH]

                  I'm spread too thin and need to cut back on my classes. Excellent condition and craftsmanship Dewie built in 2015. Complete with all Tietz hardware. No damage or wrecks. 36" bottom, 81" afterplane, 51" sponsons, vinyl wrapped. I'm 180 lbs. and weigh in right around 440 lbs. $2500

                  APBA Cliff pipe kit. $500

                  Tietz 8.25" tall tower, both 102 and 302 bolt patters are machined into it. $650

                  Goller built 102 foot with extended skeg. All fresh gears and seals 7/2017. $650

                  Plus shipping all items.

                  Open to some dickering on package deals. Individually, not so much.

                  Located in Oregon.

                  Ken McMurphy

                  503-319-5562
                  Best time to call?
                  100N STEVE FRENCH > Nobody can hang with my STUFF!! >> http://www.youtube.com/watch?v=tna3B5zqHdk

                  SEEEEEE YAAAAAA!!............In my WAKE!! .............100N>>

                  Comment

                  Working...
                  X