Announcement

Announcement Module
Collapse
No announcement yet.

Lower unit shaping

Page Title Module
Move Remove Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lower unit shaping

    since tom cronk has gotten out of the lower unit shaping business and tj has a bunch of 300's to seal, who is the 'go to' shaping person? anyone stepping up?

    frank novotny
    52-E
    Dennis Crews likes this.

  • #2

    Re: Lower unit shaping

    Those of you that require lower unit shaping service should give SST45 Champion Mark Schmerbauch a call. He does all of the work for me, and is a master. He has an intimate understanding of underwater dynamics, and surface finishes. He's at 414-510-7820. Call after 11 a.m. c.s.t.
    Mike29J likes this.

    Comment


    • squirrelboydeluxe
      squirrelboydeluxe commented
      Editing a comment
      Thank you for this info foot_doctor...
      I have a Y80 foot that needs a little love- I'm caling Mark S.
      522-P

  • #3

    Re: Lower unit shaping

    Not sure if this helps, but I had my 302 Yamato foot shaped by Brian Goodwin here in Ontario Canada and he did an excellent job! He is a machinist.

    Comment


    • #4

      Re: Lower unit shaping

      Foot Doctor,show a picture of one of his units



      Comment


      • #5

        Re: Lower unit shaping

        Who has been doing the skeg extension on the horizontal split gear case for the Hot Rods? That work is exceptionally perfect.



        Comment


        • #6

          Re: Lower unit shaping

          Sorry Tom, I have no photos of Mark's work. Perhaps if you call him, he could provide one. R.T.

          Comment

          Working...
          X